Flexible PVC and rubber edge trims for sheet metal edges, cabinets, equipment panels and automotive applications.
PVC edge trim profiles include plain U-channels, metal-carrier clip-on trims and trim seals with an attached bulb or lip. Select the section by finished flange thickness, grip range, bend route and whether the profile only covers an edge or must also seal a working gap. For fit decisions, use the grip-range guide; compare a metal-carrier clip-on profile when retention is required, and see industrial edge protection selection for application planning.
| Material | PVC / Rubber / TPE options |
| Color | Black, grey, red, blue, green or custom |
| Profile Type | U-channel, edge trim, trim seal, clip-on profile |
| Insert | Metal carrier optional depending on structure |
| Application | Edge protection and sealing |
| Customization | Section, length, color and packaging |
Choose the basic construction from the function required at the edge, then validate grip and bend behavior on the real panel.
| Profile type | Primary function | Critical inputs | Validation focus |
|---|---|---|---|
| Plain flexible U-channel | Covers and protects a regular exposed edge | Finished thickness, channel dimensions, material and color | Fit, surface coverage and retention on straight edges |
| Metal-carrier clip-on trim | Adds defined mechanical grip without separate fasteners | Grip range, carrier design, edge route and bend radius | Installation force, pull-off and corner retention |
| Trim seal with bulb or lip | Combines edge retention with compression sealing | Flange thickness, bulb position, working gap and compression | Grip and sealing performance as separate acceptance checks |
| Decorative or colored trim | Provides edge finish and visual identification | Color reference, surface finish, substrate and exposure | Color approval, marking and appearance around bends |
A nominal panel thickness is only the starting point. Stable installation depends on the trim channel, carrier, edge route and applied loads.
| Input | What to measure or specify | Why it matters |
|---|---|---|
| Panel fit | Minimum/maximum thickness, coatings, seams and local stack-up | Determines the required grip range |
| Edge geometry | Straight length, inside/outside corners, bend radius and cutouts | Affects installation force, wrinkling and corner retention |
| Carrier | Metal-reinforced or non-metal construction; pull-off requirement | Changes grip behavior and reusability |
| Seal function | Edge cover only or attached bulb/lip; working gap and compression | Separates retention requirements from sealing requirements |
| Environment | Temperature, UV, water, fluids, vibration and indoor/outdoor use | Supports material and validation selection |
| Supply format | Coil or cut length, end treatment, quantity, labeling and carton | Affects installation handling and commercial terms |
Approve the trim on representative straight sections and the tightest production corner. Record the profile revision, panel condition and acceptance criteria used for the trial.
Covers exposed metal or plastic edges when the channel geometry and grip range match the panel.
Clip-on installation must be checked against panel thickness, edge radius, corners and pull-off requirement.
Available in black and custom colors for different product designs.
Suitable for equipment, vehicles, cabinets, panels and enclosure systems.
Use the detailed RFQ form to attach a section drawing or photo and provide panel thickness, edge route, material, color, quantity and packing requirements.
Profile feasibility, tooling, color matching, supply format and timing are confirmed after the drawing and quantity review.
The suitable edge thickness depends on profile design. Send your panel thickness for recommendation.
Metal-carrier structures can be considered when the project requires defined grip range, bend behavior and pull-off retention.
Common colors and project-specific color matching can be reviewed against the profile material and order requirements.
The first photos show edge-trim colors and channel shapes; the adhesive and decorative strips are related sealing products, not PVC edge-trim section examples. Confirm the exact profile, panel fit and material before ordering.
Flexible edge protection strips for automotive, equipment and cabinet applications.
Colored U-channel and clip-on edge trim profiles for custom applications.
Colorful edge trim and rubber profile collection with unchanged real sections.
Black U-channel rubber profile for glass run, edge sealing and industrial use.
White sealing strip roll with pressure-sensitive adhesive backing for clean installation.
Printed flexible sealing strip roll for retail and household applications.
Review grip range selection, internal metal carriers, sealing bulb positions, colors and OEM cut-length supply.
Dedicated product pages with application guidance, specification references and project-specific OEM/ODM review.
