Flexible PVC and rubber edge trims with built-in metal/steel skeleton for sheet metal edges, electrical enclosures, control panels, and heavy machinery protection.
Select an edge trim by the finished flange thickness—not the nominal sheet thickness alone. Record the minimum and maximum edge thickness, bend route, inside and outside radii, cut-end exposure and required pull-off retention. Match those inputs to the grip range and carrier geometry, then trial the profile on the actual panel. See the edge-trim grip range guide before preparing an inquiry. For drawing-based sections, colors and supply formats, review our PVC edge trim manufacturing capabilities.
| Material | Flexible PVC / Nitrile Rubber / EPDM |
| Core | Built-in segmented steel clips / wire skeleton |
| Color | Black, Grey, Red, Blue, White, custom colors |
| Flange Thickness | Profile-specific ranges; confirm against minimum and maximum finished flange thickness |
| Hardness | Profile- and compound-specific; confirm required flexibility and retention |
| Surface Finish | Pebble texture, leather texture, gloss or matte |
Many profiles install without glue or rivets. Confirm grip range and pull-off retention on the actual finished edge.
Segmented or wire carriers affect clamping, flexibility and the bend path; confirm retention and fit on the finished flange.
Specify sunlight, moisture, oils, cleaning agents, chemicals and cut-end exposure so material and carrier testing can be agreed.
Define required color, texture and visible-surface condition together with functional fit requirements.
You need to measure the edge thickness (or flange range) of your metal panel. Edge trims are classified by profile-specific grip ranges. Measure the finished flange at several points, including coatings, seams or stacked material, then confirm fit and pull-off retention on the actual panel.
The jacket helps isolate the carrier, but cut ends, damage and prolonged exposure can still matter. Confirm carrier protection and corrosion testing for the actual outdoor or chemical environment.
Yes. Due to the segmented design of the internal steel carrier, segmented-carrier edge trims can follow many curves. Confirm the minimum inside and outside bend radii with a trial on the actual routing path.
Representative edge trim, rubber extrusion and weatherstrip photos are shown for related profile comparison; confirm the required cross-section against your drawing or sample.
Flexible edge protection strips for automotive, equipment and cabinet applications.
Section-based extrusion solutions for sealing, protection and cushioning functions.
Vehicle sealing systems for doors, trunks, hoods and glass channels.
